PawPrints home

Materials guide

These statue finishes. The size is the longest side, including the small base.

Full Colour

Full Colour

5 cm to 30 cm

Best for. An indoor full-colour statue, up to about the length of a school ruler. Not for the garden.

How it looks. High-definition colour printing maps your pet's coat directly onto the 3D surface. It preserves distinctive colours, markings, and patterns for the most lifelike Pawprints finish.

Finish. UV material jetting (Mimaki). Fine detail with a smooth matte finish.

Expected detail

A highly detailed UV-cured resin colour print. Fine detail goes down to about 0.8 mm, which is good for fur texture and markings. Indoor display only. This is not a garden or outdoor material. The supplier box goes up to 495 × 495 × 300 mm, and walls need to be at least 1.0 mm. Pieces above about 8 cm have to be hollow, with walls about 3 mm and an escape hole hidden under the base (at least 3 mm for one hole, or at least 1 mm when there are several). Enclosed cavities are rejected. Pieces about 8 cm and under stay solid.

A real full-colour print of a dog, photographed on a notebook
Bronze

Bronze

8 cm to 10 cm

Premium · made to order. Premium lost-wax bronze, made to order. We confirm the price and timing by email. No payment is taken until you agree.

Best for. A premium lost-wax bronze, made to order. Bronze starts at 8 cm so fine detail holds.

How it looks. Your model is first 3D printed in high-detail wax. The wax is then encased in a ceramic shell, heated until the wax melts away, and molten bronze is poured into the mould. The result is a solid metal keepsake with incredible detail — the same technique used for fine jewellery and sculpture for thousands of years.

Finish. Investment casting. Real tin bronze (about 90% copper, 10% tin). Heirloom quality. Natural or hand-polished finish. It will develop a patina over time. Hollow where the shape allows, not a solid lump.

Expected detail

Lost-wax cast bronze, premium and made to order. The size is 8 cm to 10 cm so fine detail holds. An automatic quote only fits inside 89 × 89 × 100 mm, width and depth as well as height. Walls aim for about 1.5 to 2 mm. The supplier minimum is 0.6 mm Natural and 0.8 mm Polished. One escape hole is 4 mm, or 2 mm when there are several, kept under the base. Larger bronze, or a better price, stays a manual special request to Kings 3D. Each one is approved by hand before it is made, and the price is quoted for that model.

Eggshell white large-format statue finish

Eggshell White

8 cm to 40 cm

Best for. A single-colour garden statue in eggshell white. Adorable sizes start around 8 to 12 cm, and larger pieces run to about 40 cm. Over 30 cm, the supplier charges extra.

How it looks. A soft eggshell-white finish in robust ASA, engineered to resist UV light and weather. This material offers a dramatically larger build volume than colour or bronze, making it the best choice for a large statement sculpture.

Finish. Weather-resistant ASA printing. UV- and weather-resistant ASA, in a soft eggshell-white monochrome finish.

Expected detail

UV-stable, detailed FDM print at 0.2 mm layers, so there are very fine layer steps on the surface. Those small steps can be seen up close on small pieces, and look very good on statues above about 10 cm. It suits display, including some outdoor light, because the material is UV-stable. The supplier describes this ASA as weather- and UV-resistant. It prints as a shell with infill, not a hollow piece, and enclosed cavities are not allowed. We plan on Medium: about a 1.2 mm shell and 35% infill. Light is about 0.8 mm and 15% infill, Strong about a 1.6 mm shell and 75% infill, and Solid is also offered. A thicker shell than Medium is a custom request.

Midnight Black

8 cm to 40 cm

Best for. The same garden ASA as Eggshell White, in black. Same sizes, from about 8 cm to 40 cm.

How it looks. A midnight-black finish in the same robust ASA as Eggshell White, engineered to resist UV light and weather. It uses the same detailed FDM print and the same large build size.

Finish. Weather-resistant ASA printing. UV- and weather-resistant ASA, in a midnight-black monochrome finish.

Expected detail

The same material and process as Eggshell White, in black. UV-stable, detailed FDM print at 0.2 mm layers, so there are very fine layer steps on the surface. Those small steps can be seen up close on small pieces, and look very good on statues above about 10 cm. It suits display, including some outdoor light, because the material is UV-stable. The supplier describes this ASA as weather- and UV-resistant. It prints as a shell with infill, not a hollow piece, and enclosed cavities are not allowed. We plan on Medium: about a 1.2 mm shell and 35% infill. Light is about 0.8 mm and 15% infill, Strong about a 1.6 mm shell and 75% infill, and Solid is also offered. A thicker shell than Medium is a custom request.

You can close this tab to return to your design.